What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 23.06.2025 03:04

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There are three different concepts here that are getting confused.
[image of Common-mode choke]
Clair Obscur: Expedition 33 Teases Big Improvements for Future Updates - Push Square
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
CPI Report Today: Dow Futures Slip; U.S. and China Agree Trade Truce Framework - WSJ
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The third is lightning and “how it gets conducted into a home.”
the problem then depends on "how fast does the fuse operate?".
but I think this circuit , shows a few more pieces.
There are two important concepts here.
(Dc diagram shown, AC is similar).
We've Finally Seen The Skyscraper Tsunami That Shook Earth For 9 Days - ScienceAlert
2024–10–10[John johnson John Johnson ]
Here is a simplified AC power diagram.
These are simplified answers to the original question, and does not change anything I wrote above.
Illum autem fuga doloremque est quod delectus id.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
One
so, what happens?
Xbox sale round-up June 3, 2025 - DLC - TrueAchievements
A circuit breaker is similar, but is resettable.
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
What are the most interesting use cases of Alibaba's Qwen model?
This is 'the assistant's answer'
It seems Mohan does not understand the difference between a comment and an Answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
With a housing crisis going on, should we make owning properties illegal?
But… the neutral is now “floating” because of the 1 ohm resistance.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
nine
Upvotes:
This one hit behind the barn.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
'Razor blade throat': Answers to questions about the new COVID variant - Hays Post
eight
He then describes the function of a fuse.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Montana warns of new disease-carrying tick species in the state - KREM
A fuse is a non-resetable over current circuit protector.
In schematic diagrams this is the symbol for a fuse:
It also is a device that limits the change in current flow.
See the moon shine with famous red star Antares in the southern sky on June 9 - Space
Edit 2024–10.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What does a fuse do?
Caputo: 10 options for the Tigers at trade deadline - Audacy
This is where this question deviates from being a 'generic' question, and becomes more specific.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Hailee Steinfeld Marries Bills QB Josh Allen - The Hollywood Reporter
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At one ohm, the resistor has a maximum of 1 watt power.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The other is “what does a “fuse” do?”
First Sentence:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
An AC voltage/ current source, and an ac inductive load.
a photo is worth a thousand words.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–16 [ OO OLAOYE OYEBODE ]
what exactly is a ‘surge’ protector?
He then asserts :
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Barnstars:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
[old diagram got deleted by accident]
These devices are installed between the “hot” and “neutral” and protective ground.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But it can get overloaded, and no longer works.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
I post the exact comment here.
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
So, the voltage could go up to 500 volts, and the fuse will not open up.
Because the load is inductive, the current lags the voltage.(by a bit).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
For this case there are devices called Metal oxide varistors (MOV).
The bolt then partially travels down the line to your home.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
but this device (an Inductor) … impedes the rapid changes in the current.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”